VMware 5V0-31.22 Latest Exam Testking | Dumps 5V0-31.22 Free

P.S. Free & New 5V0-31.22 dumps are available on Google Drive shared by PremiumVCEDump: https://drive.google.com/open?id=1OGkyYcNwPc1lDvuFcKbus2AisJjjmHBv

In modern society, you cannot support yourself if you stop learning. That means you must work hard to learn useful knowledge in order to survive especially in your daily work. Our 5V0-31.22 learning questions are filled with useful knowledge, which will broaden your horizons and update your skills. Lack of the knowledge cannot help you accomplish the tasks efficiently. But our 5V0-31.22 Exam Questions can help you solve all of these probelms. And our 5V0-31.22 study guide can be your work assistant.

VMware 5V0-31.22 Certification Exam is designed for professionals who specialize in VMware Cloud Foundation. 5V0-31.22 exam is aimed at testing the candidate's knowledge of VMware Cloud Foundation (VCF) architecture and operations, VCF deployment, and management of VCF components.

VMware 5V0-31.22 (VMware Cloud Foundation Specialist (v2)) Certification Exam is a professional-level certification exam that is designed to test the skills and knowledge of IT professionals in implementing and managing VMware Cloud Foundation environments. VMware Cloud Foundation Specialist (v2) certification exam is intended for individuals who have experience in virtualization, networking, storage, and cloud computing technologies. The VMware Cloud Foundation Specialist (v2) certification validates the ability of an individual to install, configure, and manage VMware Cloud Foundation environments, including vSphere, NSX, vSAN, and SDDC Manager.

>> VMware 5V0-31.22 Latest Exam Testking <<

Dumps 5V0-31.22 Free, New 5V0-31.22 Exam Review

There may be some other study materials with higher profile and lower price than our products, but we can assure you that the passing rate of our 5V0-31.22 learning materials is much higher than theirs. And this is the most important. According to previous data, 98 % to 99 % of the people who use our 5V0-31.22 Training Questions passed the exam successfully. If you are willing to give us a trust on our 5V0-31.22 exam questions, we will give you a success.

VMware 5V0-31.22, also known as the VMware Cloud Foundation Specialist (v2) exam, is a certification exam that is designed for IT professionals who want to validate their skills and knowledge in VMware Cloud Foundation. 5V0-31.22 exam is intended for individuals who are responsible for designing, deploying, and managing VMware Cloud Foundation environments. 5V0-31.22 Exam is a great way for IT professionals to demonstrate their expertise in this technology and advance their careers.

VMware Cloud Foundation Specialist (v2) Sample Questions (Q97-Q102):

NEW QUESTION # 97
Which two options can be used to create a new VMware Cloud Foundation VI workload domain? (Choose two.)

A. PowerCLI
B. vCenter Ul
C. SDDC Manager Ul
D. REST API
E. Cloud Builder Ul

Answer: C,D

Explanation:
Explanation
The SDDC Manager UI provides a single point of control for managing and monitoring your VMware Cloud Foundation instance and for provisioning workload domains. You use the navigation bar to move between the main areas of the user interface 1. The SDDC Manager UI provides an integrated view of the physical and virtual infrastructure and centralized access to manage the physical and logical resources 2.
The REST API can also be used to create a new VI workload domain using VMware Cloud Foundation. The VMware Cloud Foundation API Reference Guide provides information on available operations 3.

NEW QUESTION # 98
During a VCF design workshop, the architect gathered the following customer requirements:
- There should be two environments: PROD and DEV.
- PROD and DEV workloads should communicate without traversing the
physical network.
- The PROD workload domain should be separate from the DEV workload
domain.
- The VCF infrastructure design should be flexible and scalable as much as possible.
How many total NSX manager cluster(s) will be deployed as part of the solution?

A. 0
B. 1
C. 2
D. 3

Answer: A

NEW QUESTION # 99
An administrator is creating a VI Workload Domain where NSX-T must be configured to allow for dynamic routing.
Which pre-requisites are required?

A. Two BGP peers on ToR switches with an interface IP and BGP Autonomous System Number
B. Separate VLANs and subnets available for NSX-T Host Overlay TEP VLAN and NSX-T Edge Overlay TEP VLAN
C. Two MPLS peers on ToR switches with an interface IP and an iBGP Autonomous System Number
D. Reserved BGP Autonomous System Number to use for the NSX-T Edge cluster's Tier-0 gateway

Answer: A

Explanation:
For dynamic routing, set up two Border Gateway Protocol (BGP) peers on Top of Rack (ToR) switches with an interface IP, BGP autonomous system number (ASN), and BGP password.
https://docs.vmware.com/en/VMware-Cloud-
Foundation/5.1/com.vmware.vcf.vxrail.doc/GUID-D6271E5A-05E9-4AE1-A3CE-
87820DC3001B.html

NEW QUESTION # 100
An architect needs to enable the workload management for a VCF VI workload domain and plans on using the minimum requirement for deploying a highly available NSX edge cluster.
What is the minimum requirement for this deployment?

A. A cluster of two small NSX edge nodes
B. A cluster of two large NSX edge nodes
C. A cluster of three large NSX edge node
D. A cluster of one large NSX edge node

Answer: B

Explanation:
Explanation
This is because according to VMware documentation1, a VI workload domain consists of one or more vSphere clusters that run customer workloads. To enable workload management for a VI workload domain, you need to have an NSX-T edge cluster that provides north-south connectivity and load balancing for Kubernetes clusters
2. The minimum requirement for creating an NSX-T edge cluster is two edge nodes34. The size of the edge nodes depends on the throughput and features required, but for high availability, large size is recommended5.
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-getting-started/GUID-C68FD810-D270-43F2-A

NEW QUESTION # 101
A systems administrator needs to apply a custom ESXi image to a host using VMware Imaging Appliance (VIA). Which statement is correct when preparing a host for imaging?

A. PXE Boot must be configured as the second boot option.
B. VMware Cloud Builder appliance must be deployed in a tagged VLAN/Network.
C. Onboard NICs should be enabled on the server.
D. VIA service does not support UEFI boot mode.

Answer: C

Explanation:
Explanation
This is because VIA service uses PXE boot to install ESXi on the servers, and it requires onboard NICs to be enabled and connected to an untagged VLAN/Network1.
According to VMware documentation on VMware Imaging Appliance, when preparing a host for imaging using VIA, it is recommended to enable the onboard NICs on the server. This enables the network adapter to participate in the boot sequence of the host to retrieve the image from the Imaging Appliance.
Here is the relevant quote from the documentation:
"To prepare the host, ensure that the onboard NICs are enabled on the server. During boot up, the server firmware detects the network adapter and adds it to the boot sequence list so that it can participate in network boot."
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-deploy/GUID-735928E5-1DD7-44E5-BE32-E5

NEW QUESTION # 102
......

Dumps 5V0-31.22 Free: https://www.premiumvcedump.com/VMware/valid-5V0-31.22-premium-vce-exam-dumps.html

2025 Latest PremiumVCEDump 5V0-31.22 PDF Dumps and 5V0-31.22 Exam Engine Free Share: https://drive.google.com/open?id=1OGkyYcNwPc1lDvuFcKbus2AisJjjmHBv

Zachary Adams Zachary Adams

Biography

VMware 5V0-31.22 Latest Exam Testking | Dumps 5V0-31.22 Free

Dumps 5V0-31.22 Free, New 5V0-31.22 Exam Review

VMware Cloud Foundation Specialist (v2) Sample Questions (Q97-Q102):

Quick Links

Resources

Support